The current state of the art of several aspects of minerals and petroleum is presented in this volume. It documents the proceedings of the Internationl symposium on Particle Technology and Surface Phenomena in Minerals and Petroleum sponsored by the Fine Particle Society (FPS). This meeting was held in San Diego, California, August 21-25, 1990. The symposium upon which this volume is based was organized in five sessions emphasizing various basic and applied aspects of research on minerals and petroleum technology. Major topics discussed involve surface phenomena in minerals, mineral flotation, characterization of aspaltenes, theoretical aspects of reservoir simulation, porosity, permeability, residual water saturation, hydrocarbon and gas potential in north slope Alaska, polymer/alkaline flooding, surfactant flooding and foam flooding for enhanced oil recovery. This edition includes eighteen selected papers presented in the symposium. These papers are divided in four broad categories: (1) Asphaltene Aggregation and Characterization, (2) Theoretical Aspects and Reservoir Characterization, (3) Colloidal Dispersions in Minerals/Petroleum, and (4) Surface Phenomena and Petroleum Recovery. Several mineral and oil recovery processes using various chemicals with special reference to surface phenomena and particle technology are described in these sections.

Water-based technology has undergone revolutionary changes during the past two decades. Interest in the properties and uses of water-based coatings, paints and inks has continued to grow since the establishment of the Clean Air Act of 1970. The present book is devoted to recent developments and trends in water-based coating and ink technology. This volume is divided in three broad catagories: (1) Additives and Water-based Coating/Ink Systems, (2) Surface Modifications and Wettability, and (3) Ink/Coating Formulations and Their characterization. The role of various additives to improve the performance and properties of water-based coatings with special reference to surface phenomena such as wettability, adhesion, surface energies, dispersion stability, particle size and size distribution are presented in these sections. This volume documents the proceedings of the International symposium on Surface Phenomena and Additives in Water-Based Coatings and Printing Technology sponsored by the 21st Annual Meeting of the Fine Particle Society (FPS). This meeting was held in San Diego, california, AUgust 21-25, 1990. The symposium upon which this volume is based was organized in four sessions emphasizing several basic and applied aspects of water-based coatings and printing technology. Major topics discussed include advances in water-based technology, water-based flexo and gravure inks, hydrophobically-modified cellulosic thickeners, organosilicones, uv curable silicone release coatings, surface characterization of Ti02 pigments, polymer substrates, flexographic plates and coating films, pigment wetting and dispersing agents, hydrotrope effect in emulsion polymers, film thickness control, particle size measurements, rheological properties, and statistically designed mixtures for ink formulations.

THE CURRENT STATE OF THE ART of several aspects of asphaltene is presented in this volume. It documents the proceedings of the Internationl Symposium on Asphaltene Particles in Fossil Fuel Exploration, Recovery, Refining and Production Processes sponsored by the Fine particle Society (FPS). This meeting was held il1 Las vegas, Nevada, July 13 -17, 1992. The symposium upon which this volume is based was organized in four sessions emphasizing various basic and applied aspects of research on asphaltene technology. Major topics discussed involve surface phenomena of asphaltene, processed and unprocessed bitumen, asphaltene effect on natural and accelerated ageing of bitumens, asphaltene conversion, theoretical aspects of asphaltenes and interactions of asphaltene colloids in organic solvents. This edition includes eighteen selected papers presented at the symposium. These papers are divided in four broad categories: (1) Bitumen and Coal-Derived Asphaltenes, (2) Asphalt and Asphaltene conversion, (3) Surface and Colloidal Aspects of Asphaltenes, and (4) Thermodynamic and Molecular Aspects of Asphaltenes.

THE CURRENT STATE OF THE ART of waterborne polymers, paints, coatings, inks and printing processes is presented in this volume. This is the third volume in the series on waterborne coating and printing technology. It documents several invited papers and the proceedings of the International Symposium on Surface Phenomena and Latexes in Waterborne Coatings and printing Technology sponsored by the Fine Particle Society (FPS). The FPS meeting was held in Las Vegas, Nevada, July 13-17, 1992. The volume deals with various basic and applied aspects of research on waterborne coating printing technology. Major topics discussed involve waterborne polymers and polymer blends, pigment grinding, millbases, paint formulation, and characterization of coating films. This edition includes sixteen selected papers related to recent developments in waterborne technology. These papers are divided in three broad categories: (1) Waterborne Polymers and pigment Dispersions, (2) Latex Film, Wetting Phenomena and Printing Gloss, (3) Surfactants and Polymers in Aqueous Coating printing Systems. This volume includes discussions of various waterborne polymers in coating printing systems. The editors hope that this volume will serve its intended objective of reflecting the current understanding of formulation and process problems related to waterborne coatings, paints and inks. In addition, it will be a valuable reference source for both novices as well as experts in the field of waterborne technology. It will also help the readers to understand underlying surface phenomena and will enhance the reader's potential for solving critical formulation, evaluation and process problems.

THE CURRENT STATE OF THE ART of waterborne polymers, paints, coatings, inks and printing processes is presented in this volume. This is the third volume in the series on waterborne coating and printing technology. It documents several invited papers and the proceedings of the International Symposium on Surface Phenomena and Latexes in Waterborne Coatings and printing Technology sponsored by the Fine Particle Society (FPS). The FPS meeting was held in Las Vegas, Nevada, July 13-17, 1992. The volume deals with various basic and applied aspects of research on waterborne coating printing technology. Major topics discussed involve waterborne polymers and polymer blends, pigment grinding, millbases, paint formulation, and characterization of coating films. This edition includes sixteen selected papers related to recent developments in waterborne technology. These papers are divided in three broad categories: (1) Waterborne Polymers and pigment Dispersions, (2) Latex Film, Wetting Phenomena and Printing Gloss, (3) Surfactants and Polymers in Aqueous Coating printing Systems. This volume includes discussions of various waterborne polymers in coating printing systems. The editors hope that this volume will serve its intended objective of reflecting the current understanding of formulation and process problems related to waterborne coatings, paints and inks. In addition, it will be a valuable reference source for both novices as well as experts in the field of waterborne technology. It will also help the readers to understand underlying surface phenomena and will enhance the reader's potential for solving critical formulation, evaluation and process problems.

The current state of the art of several aspects of minerals and petroleum is presented in this volume. It documents the proceedings of the Internationl symposium on Particle Technology and Surface Phenomena in Minerals and Petroleum sponsored by the Fine Particle Society (FPS). This meeting was held in San Diego, California, August 21-25, 1990. The symposium upon which this volume is based was organized in five sessions emphasizing various basic and applied aspects of research on minerals and petroleum technology. Major topics discussed involve surface phenomena in minerals, mineral flotation, characterization of aspaltenes, theoretical aspects of reservoir simulation, porosity, permeability, residual water saturation, hydrocarbon and gas potential in north slope Alaska, polymer/alkaline flooding, surfactant flooding and foam flooding for enhanced oil recovery. This edition includes eighteen selected papers presented in the symposium. These papers are divided in four broad categories: (1) Asphaltene Aggregation and Characterization, (2) Theoretical Aspects and Reservoir Characterization, (3) Colloidal Dispersions in Minerals/Petroleum, and (4) Surface Phenomena and Petroleum Recovery. Several mineral and oil recovery processes using various chemicals with special reference to surface phenomena and particle technology are described in these sections.

Water-based technology has undergone revolutionary changes during the past two decades. Interest in the properties and uses of water-based coatings, paints and inks has continued to grow since the establishment of the Clean Air Act of 1970. The present book is devoted to recent developments and trends in water-based coating and ink technology. This volume is divided in three broad catagories: (1) Additives and Water-based Coating/Ink Systems, (2) Surface Modifications and Wettability, and (3) Ink/Coating Formulations and Their characterization. The role of various additives to improve the performance and properties of water-based coatings with special reference to surface phenomena such as wettability, adhesion, surface energies, dispersion stability, particle size and size distribution are presented in these sections. This volume documents the proceedings of the International symposium on Surface Phenomena and Additives in Water-Based Coatings and Printing Technology sponsored by the 21st Annual Meeting of the Fine Particle Society (FPS). This meeting was held in San Diego, california, AUgust 21-25, 1990. The symposium upon which this volume is based was organized in four sessions emphasizing several basic and applied aspects of water-based coatings and printing technology. Major topics discussed include advances in water-based technology, water-based flexo and gravure inks, hydrophobically-modified cellulosic thickeners, organosilicones, uv curable silicone release coatings, surface characterization of Ti02 pigments, polymer substrates, flexographic plates and coating films, pigment wetting and dispersing agents, hydrotrope effect in emulsion polymers, film thickness control, particle size measurements, rheological properties, and statistically designed mixtures for ink formulations.

'IHE CURRENT STATE OF 'IHE AID' of several aspects of water-based coatings and printing processes is presented in this voltnne. It documents the proceedings of the Intemationl Syrrposium on Surface RJ. enornena and Fine Particles in Water-Based Coatings and Printing Teclmology sponsored by the Fine Particle Society (FPS). '!his meeting was held in Boston, Massachusetts, August 21-25, 1989. '!he syrrp:>sium upon which this voltnne is based was organized in six sessions errphasizing various basic and applied areas of research on water-based technology. Major topics discussed involve surface phenomena in coatings, printing defects and their remedies, surface tension effects in water-based coatings and printing inks, surface energies of polymer substrates, wettability, aqueous polymeric film coating of pharmaceuticals, flexographic and gravure printing processes, characterization of coating materials, pigment dispersion, wax emulsions for surface modifications, and the role of polymer in particle/surface deposition. '!his edition includes the twenty four selected papers presented in the syrrp:>sium. '!hese papers are divided in three broad categories: (1) Water-Based Inks and Coatings, (2) Emulsions and Adhesion in Coatings, and (3) Characterization of Coating and Printing Materials. Several types of coating and printing on different substrates using water-based fonnulations with special reference to surface phenomena and particle technology are described in these sections. This proceedings vo1tnne includes discussions of various processes occuring at llIOlecular, microscopic, and macroscopic levels in water-based coatings and printing processes.

Bitumen and CoalDerived Asphaltenes: AsphalteneViscosity Relationship of Processed and Unprocessed Bitumen (A. Chakma et al.). Natural and Accelerated Aging of Bitumens (F.S. Choquest, A.F. Verhasselt). Asphalt and Asphaltene Conversion: Classification of Asphalt Types by Asphaltene Aromaticity (H.J. Lian, T.F. Yen). Sludge Formation During Heavy Oil Conversion (D.A. Storm et al.). Surface and Colloidal Aspects of Asphaltenes: Surface Activity and Dynamics of Asphaltenes (E.Y. Sheu et al.). Role of Asphaltenes in Recovering Heavy Oil through MicroBubble Generation (M.R. Islam, A. Chakma). Thermodynamic and Molecular Aspects of Asphaltenes: The Study of Molecular Attractions in the Asphalt System by Solubility Parameter (J.R. Lin, T.F. Yen). Solvation of Ratawi Asphaltenes in Vacuum Residue (D.A. Storm et al.). 10 additional articles. Index.